How to Lubricate Your Lock Properly? Grease or Oil?

  • by

It is important to clean your door lock at least once or twice a year to avoid a lot of inconveniences. A poorly maintained lock can wear out more quickly or even break and require you to incur substantial costs in order to have it repaired or even changed. Using a lubricant or oil is strongly recommended but should be moderate so as not to foul your lock more. Here is everything you need to know to lubricate your lock using the right products and adopting the right actions. These tips come from professional locksmiths in order to guarantee you a quality result that will meet all your expectations.

When and which product to choose to lubricate a lock safely?

To maintain cylinder locks, it is best to opt for a non-greasy lubricant in the form of a spray for precise use. To clean them in-depth, you just need to inject this lubricant into the inlet of your cylinder. You can do this at least twice a year and especially before winter because the locks can seize in the frost. You can also use a little oil, but be careful about the dose to avoid a faster clogging of your lock. In fact, with too much oil, you risk the opposite effect clogging the inside of your cylinder.

Because of this, your key may spin in a vacuum and will no longer be able to open or close a door. It is, therefore, preferable to opt for fats or oils sold in a bottle and with a small spout that will allow you not to put too much inside. Too much oil or grease can also wear out your door opening and closing system more quickly.

How to maintain and lubricate groove locks?

For the maintenance of groove locks, a single small drop of fine oil will be sufficient. You can run it directly into your cylinder or soak a cotton swab for more precise and careful use. Another quick and risk-free solution: oil your key without overdoing it and insert it into your lock. Twist several times before taking it out. You will see that all the deposits and dirt will be stuck to your key and the inside of your lock will be clean. Remember to clean your key well with a soft cloth.

Air bombs: The choice of safety for a good cleaning

There are also compressed air canisters that you can easily find in the market for cleaning your locks. With just one press inside your cylinder, all the dust will disappear without damaging your equipment. Thus, you will not risk damaging your lock and therefore you can properly clean it so that it can function for many years to come. In addition, the compressed air bombs are sold at attractive prices and will make you save attractive because, with a simple pressure, you will be able to clean the inside of your lock

There are also compressed air canisters that you can easily find in the market for cleaning your locks. With just one press inside your cylinder, all the dust will disappear without damaging your equipment. Thus, you will not risk damaging your lock and therefore you can properly clean it so that it can function for many years to come. In addition, the compressed air bombs are sold at attractive prices and will make you save attractive because, with simple pressure, you will be able to clean the inside of your lock completely. You will be able to use it for many uses and for an always effective result.

Different lubricants and oils available on the market to maintain your locks

A wide choice of high-quality lubricants is on sale in locksmith or DIY stores to allow you to maintain all your locks on a daily basis. Do not hesitate to seek advice from a professional locksmith in Phoenix, Arizona, especially if you have a particular lock so as not to damage or break it because of an unsuitable product.

So nothing is simpler to grease and lubricate a lock so that it can function correctly for a long time. Cleaning and maintaining a lock is essential if you want to save money on repairs. Locks that are very clean and well greased are a guarantee of durability and an extended lifespan. It will require little expense, time, and skill to keep them intact and like new over the years.